Dataset

3D Mineral mapping of Queensland - Version 2 ASTER and related geoscience products

Commonwealth Scientific and Industrial Research Organisation
Cudahy, Tom ( Contributor ) Jones, Mal ( Contributor ) Lisitsin, Vladimir A. ( Contributor ) Caccetta, Mike ( Contributor ) Collings, Simon ( Contributor ) Bateman, Roger ( Contributor )
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=info:doi10.4225/08/59068b8b07cf6&rft.title=3D Mineral mapping of Queensland - Version 2 ASTER and related geoscience products&rft.identifier=10.4225/08/59068b8b07cf6&rft.publisher=Commonwealth Scientific and Industrial Research Organisation (CSIRO)&rft.description=The digital 3-dimenional (3D) mineral mapping suite of Queensland comprises ~20 “standardized” products at the spectral resolution of the ASTER (Advanced Space-borne Thermal Emission and Reflection Radiometer) sensor and generated from publicly-available satellite, airborne, field and drill core spectral data spanning the visible near infrared (VNIR; 0.4 to 1.0 µm), shortwave infrared (SWIR; 1.0 to 2.5 µm) and thermal infrared (TIR; 7.5 to 12.0 µm) wavelength regions, including: 1. Satellite ASTER maps at both 30 m and 90 m pixel resolution with complete coverage of the state of Queensland, i.e. 1.853 million km²; 2. Airborne HyMap maps at ~5 m pixel resolution with a coverage of ~25,000 km2 from areas across north Queensland; 3. Field point samples (~300) from the National Geochemical Survey of Australia (NGSA) collected from a depth of 0-10 cm of flood overbank sediments; 4. Drill-core profiles (~20) of the National Virtual Core Library (NVCL) selected from the area around the Georgetown seismic line (07GA-IG2). Key to the processing of the remote sensing data-sets (ASTER and HyMap) was the implementation of unmixing methods to remove the effects dry and green vegetation. This unmixing was not applied to the Australian ASTER geoscience maps released in 2012 (called here Version 1 or V1) resulting in extensive areas with little/no mineral information because of the need to apply masks. The vegetation unmixing methods used in the Version 2 (V2) processing of the ASTER and HyMap imagery has resulted in very few areas without coherent mineral information. The resultant V2 “mineral group” products were designed to measure mineral information potentially useful for mapping: (i) primary rock composition; (ii) superimposed alteration effects; and (iii) regolith cover. These V2 products may assist in mapping soil properties and groundwater conditions. However their relatively low spectral resolution (based on ASTER’s 14 VNIR-SWIR-TIR bands) means that they do not provide the high level of mineralogical detail available from hyperspectral systems (>100 spectral bands), like HyMap and the HyLogger. Nevertheless, the relatively low spectral resolution of ASTER means that all other sensor data can be spectrally resampled to that resolution. Furthermore, the ASTER global data archive, which now spans entire Earth’s land surface The raw ASTER data used in this project are freely available from the United States Geological Survey (USGS) Land Processes Distributed Active Archive Centre (LPDAAC) (https://lpdaac.usgs.gov/dataset_discovery/aster/aster_products_table/ast_l1t) as well as NASA’s REVERB (http://reverb.echo.nasa.gov) and Japan’s Advanced Institute for Science Technology (AIST) https://gbank.gsj.jp/madas/map. The Australian ASTER Geoscience (V1) Maps can be downloaded from CSIRO’s Data Access Portal (DAP) (https://data.csiro.au/dap/landingpage?pid=csiro%3A6182) and Geoscience Australia’s Australian Geoscience Information Network, Geoscience Australia (AUSGIN) (http://portal.geoscience.gov.au/gmap.html). The NVCL data can be downloaded from http://www.auscope.org.au/nvcl or http://portal.geoscience.gov.au/gmap.html. The National Geochemical Survey of Australia (NGSA) spectral data is accessible via CSIRO’s Data Access Portal http://www.ga.gov.au/about/projects/minerals-archive/concluded/national-geochemical-survey.&rft.creator=Cudahy, Tom &rft.creator=Jones, Mal &rft.creator=Lisitsin, Vladimir A. &rft.creator=Caccetta, Mike &rft.creator=Collings, Simon &rft.creator=Bateman, Roger &rft.date=2018&rft.edition=v3&rft.coverage=northlimit=-10.0; southlimit=-30.0; westlimit=138.0; eastLimit=154.0; projection=WGS84&rft_rights=All Rights (including copyright) CSIRO, Geological Survey of Queensland 2017.&rft_rights=Creative Commons Attribution https://creativecommons.org/licenses/by/4.0/&rft_subject=Mineral Mapping&rft_subject=3D&rft_subject=Aster&rft_subject=Hy Map &rft_subject=Nvcl&rft_subject=Ngsa&rft_subject=Vegetaion Unmixiing&rft_subject=Geology&rft_subject=Alteration&rft_subject=Regolith&rft_subject=Queensland&rft_subject=Australia&rft_subject=Version 2&rft_subject=Geophysics Not Elsewhere Classified&rft_subject=Earth Sciences&rft_subject=Geophysics&rft_subject=Environmental Sciences Not Elsewhere Classified&rft_subject=Environmental Sciences&rft_subject=Other Environmental Sciences&rft_subject=Mineralogy and Crystallography&rft_subject=Geology&rft_subject=Geology Not Elsewhere Classified&rft_subject=Photogrammetry and Remote Sensing&rft_subject=Engineering&rft_subject=Geomatic Engineering&rft_subject=Geomorphology and Regolith and Landscape Evolution&rft_subject=Physical Geography and Environmental Geoscience&rft_subject=Soil Sciences Not Elsewhere Classified&rft_subject=Soil Sciences&rft_subject=Exploration Geochemistry&rft_subject=Geochemistry&rft_subject=Earth Sciences Not Elsewhere Classified&rft_subject=Other Earth Sciences&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Creative Commons Attribution
https://creativecommons.org/licenses/by/4.0/

All Rights (including copyright) CSIRO, Geological Survey of Queensland 2017.

Access:

Open view details

Data is accessible online and may be reused in accordance with licence conditions

Brief description

The digital 3-dimenional (3D) mineral mapping suite of Queensland comprises ~20 “standardized” products at the spectral resolution of the ASTER (Advanced Space-borne Thermal Emission and Reflection Radiometer) sensor and generated from publicly-available satellite, airborne, field and drill core spectral data spanning the visible near infrared (VNIR; 0.4 to 1.0 µm), shortwave infrared (SWIR; 1.0 to 2.5 µm) and thermal infrared (TIR; 7.5 to 12.0 µm) wavelength regions, including: 1. Satellite ASTER maps at both 30 m and 90 m pixel resolution with complete coverage of the state of Queensland, i.e. 1.853 million km²; 2. Airborne HyMap maps at ~5 m pixel resolution with a coverage of ~25,000 km2 from areas across north Queensland; 3. Field point samples (~300) from the National Geochemical Survey of Australia (NGSA) collected from a depth of 0-10 cm of flood overbank sediments; 4. Drill-core profiles (~20) of the National Virtual Core Library (NVCL) selected from the area around the Georgetown seismic line (07GA-IG2). Key to the processing of the remote sensing data-sets (ASTER and HyMap) was the implementation of unmixing methods to remove the effects dry and green vegetation. This unmixing was not applied to the Australian ASTER geoscience maps released in 2012 (called here Version 1 or V1) resulting in extensive areas with little/no mineral information because of the need to apply masks. The vegetation unmixing methods used in the Version 2 (V2) processing of the ASTER and HyMap imagery has resulted in very few areas without coherent mineral information. The resultant V2 “mineral group” products were designed to measure mineral information potentially useful for mapping: (i) primary rock composition; (ii) superimposed alteration effects; and (iii) regolith cover. These V2 products may assist in mapping soil properties and groundwater conditions. However their relatively low spectral resolution (based on ASTER’s 14 VNIR-SWIR-TIR bands) means that they do not provide the high level of mineralogical detail available from hyperspectral systems (>100 spectral bands), like HyMap and the HyLogger. Nevertheless, the relatively low spectral resolution of ASTER means that all other sensor data can be spectrally resampled to that resolution. Furthermore, the ASTER global data archive, which now spans entire Earth’s land surface <80degrees latitude, means that it can be used as global base-map for integrating all other spectral data.

Lineage

The raw ASTER data used in this project are freely available from the United States Geological Survey (USGS) Land Processes Distributed Active Archive Centre (LPDAAC) (https://lpdaac.usgs.gov/dataset_discovery/aster/aster_products_table/ast_l1t) as well as NASA’s REVERB (http://reverb.echo.nasa.gov) and Japan’s Advanced Institute for Science Technology (AIST) https://gbank.gsj.jp/madas/map.
The Australian ASTER Geoscience (V1) Maps can be downloaded from CSIRO’s Data Access Portal (DAP) (https://data.csiro.au/dap/landingpage?pid=csiro%3A6182) and Geoscience Australia’s Australian Geoscience Information Network, Geoscience Australia (AUSGIN) (http://portal.geoscience.gov.au/gmap.html).
The NVCL data can be downloaded from http://www.auscope.org.au/nvcl or http://portal.geoscience.gov.au/gmap.html.
The National Geochemical Survey of Australia (NGSA) spectral data is accessible via CSIRO’s Data Access Portal http://www.ga.gov.au/about/projects/minerals-archive/concluded/national-geochemical-survey.

Data time period: 2014-12-01 to 2016-12-01

Click to explore relationships graph

154,-10 154,-30 138,-30 138,-10 154,-10

146,-20

Identifiers