Dataset
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://www.marlin.csiro.au/geonetwork/srv/en/search?uuid=253e58ef-9d5e-19c2-e053-08114f8c1730&rft.title=Lucinda Jetty Coastal Observatory January to December 2014, HPLC Pigment and Ocean Colour Data&rft.identifier=http://www.marlin.csiro.au/geonetwork/srv/en/search?uuid=253e58ef-9d5e-19c2-e053-08114f8c1730&rft.publisher=Integrated Marine Observing System&rft.description=This record contains data collected from the near-water surface sampling site off the Lucinda Jetty, as part of the Lucinda Jetty Coastal Observatory. The samples were collected between the 9th January and 15th December, 2014. The data can be used for Ocean Colour sensor validation. Parameters measured include the absorption coefficients of the particulate and dissolved components of the water column and the phytoplankton pigment concentration and composition.Water samples were taken on-board the vessel and stored under cool and dark conditions until filtering took place. Samples were analysed and QC procedures were carried out in the Ocean Colour Laboratory at CMAR, Hobart. Pigment analysis; approximately 2 litres of sample water was filtered through a 47 mm glass fibre filter (Whatman GF/F) and then stored in liquid nitrogen until analysis. To extract the pigments, the filters were cut into small pieces and covered with 100% acetone (3 mls) in a 10 ml centrifuge tube. The samples were vortexed for about 30 seconds and then sonicated for 15 minutes in the dark. The samples were then kept in the dark at 4 °C for approximately 15 hours. After this time 200 µL water was added to the acetone such that the extract mixture was 90:10 acetone:water (vol:vol) and sonicated once more for 15 minutes. The extracts were centrifuged to remove the filter paper and then filtered through a 0.2 µm membrane filter (Whatman, anatope) prior to analysis by HPLC using a Waters Alliance high performance liquid chromatography system, comprising a 2695XE separations module with column heater and refrigerated autosampler and a 2996 photo-diode array detector. Immediately prior to injection the sample extract was mixed with a buffer solution (90:10 28 mM tetrabutyl ammonium acetate, pH 6.5 : methanol) within the sample loop. Pigments were separated using a Zorbax Eclipse XDB-C8 stainless steel 150 mm x 4.6 mm ID column with 3.5 µm particle size (Agilent Technologies) with gradient elution as described in Van Heukelem and Thomas (2001). The separated pigments were detected at 436 nm and identified against standard spectra using Waters Empower software. Concentrations of chlorophyll a, chlorophyll b, b,b-carotene and b,e-carotene in sample chromatograms were determined from standards (Sigma, USA or DHI, Denmark). Spectral absorption; approximately 2 litres of sample water was filtered through a 25 mm glass fibre filter (Whatman GF/F) and the filter then stored flat in liquid nitrogen until analysis. Optical density spectra for total particulate matter were obtained using a Cinta 404 UV/VIS dual beam spectrophotometer equipped with an integrating sphere.&rft.creator=Anonymous&rft.date=2015&rft.coverage=northlimit=-18.302; southlimit=-18.302; westlimit=146.113; eastLimit=146.113; projection=GDA94&rft.coverage=northlimit=-18.302; southlimit=-18.302; westlimit=146.113; eastLimit=146.113; projection=GDA94&rft_rights=Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was provided by CSIRO.&rft_subject=Oceans&rft_subject=Chlorophyll&rft_subject=Earth Science&rft_subject=Oceans&rft_subject=Ocean Chemistry&rft_subject=Pigments&rft_subject=Ocean Color&rft_subject=Ocean Optics&rft_subject=Ct Ds (Conductivity-Temperature-Depth Profilers)&rft_subject=Fluorometers&rft_subject=Hplc (High Performance Liquid Chromatography)&rft_subject=Niskin Bottles&rft_subject=Spectrophotometers&rft_subject=Marine Features (Australia) | Great Barrier Reef, Qld&rft_subject=Lucinda Jetty Coastal Observatory&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Other view details
Unknown

Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was provided by CSIRO.

Access:

Open

Brief description

This record contains data collected from the near-water surface sampling site off the Lucinda Jetty, as part of the Lucinda Jetty Coastal Observatory. The samples were collected between the 9th January and 15th December, 2014. The data can be used for Ocean Colour sensor validation. Parameters measured include the absorption coefficients of the particulate and dissolved components of the water column and the phytoplankton pigment concentration and composition.

Lineage

Water samples were taken on-board the vessel and stored under cool and dark conditions until filtering took place. Samples were analysed and QC procedures were carried out in the Ocean Colour Laboratory at CMAR, Hobart. Pigment analysis; approximately 2 litres of sample water was filtered through a 47 mm glass fibre filter (Whatman GF/F) and then stored in liquid nitrogen until analysis. To extract the pigments, the filters were cut into small pieces and covered with 100% acetone (3 mls) in a 10 ml centrifuge tube. The samples were vortexed for about 30 seconds and then sonicated for 15 minutes in the dark. The samples were then kept in the dark at 4 °C for approximately 15 hours. After this time 200 µL water was added to the acetone such that the extract mixture was 90:10 acetone:water (vol:vol) and sonicated once more for 15 minutes. The extracts were centrifuged to remove the filter paper and then filtered through a 0.2 µm membrane filter (Whatman, anatope) prior to analysis by HPLC using a Waters Alliance high performance liquid chromatography system, comprising a 2695XE separations module with column heater and refrigerated autosampler and a 2996 photo-diode array detector. Immediately prior to injection the sample extract was mixed with a buffer solution (90:10 28 mM tetrabutyl ammonium acetate, pH 6.5 : methanol) within the sample loop. Pigments were separated using a Zorbax Eclipse XDB-C8 stainless steel 150 mm x 4.6 mm ID column with 3.5 µm particle size (Agilent Technologies) with gradient elution as described in Van Heukelem and Thomas (2001). The separated pigments were detected at 436 nm and identified against standard spectra using Waters Empower software. Concentrations of chlorophyll a, chlorophyll b, b,b-carotene and b,e-carotene in sample chromatograms were determined from standards (Sigma, USA or DHI, Denmark). Spectral absorption; approximately 2 litres of sample water was filtered through a 25 mm glass fibre filter (Whatman GF/F) and the filter then stored flat in liquid nitrogen until analysis. Optical density spectra for total particulate matter were obtained using a Cinta 404 UV/VIS dual beam spectrophotometer equipped with an integrating sphere.

Notes

Thomas Schroeder (CSIRO O&A Dutton Park), Vittorio Brando (CSIRO O&A Black Mountain)
Lesley Clementson (CSIRO O&A Hobart)
Heidi Franklin (CSIRO O&A Dutton Park)
Click to explore relationships graph

146.113,-18.302

146.113,-18.302

text: northlimit=-18.302; southlimit=-18.302; westlimit=146.113; eastLimit=146.113; projection=GDA94

Other Information
Access all data - Australian-waters Earth Observation Phytoplankton-type Products (AEsOP) (Data Link)

uri : http://aesop.csiro.au/

Data also available via IMOS and AODN portal (Data Link)

uri : https://imos.aodn.org.au/imos123/

IMOS Lucinda Jetty Coastal Observatory (LJCO ) Page (Documentation Link)

uri : http://imos.org.au/ljco.html

Overview coastal - ocean colour cal - val Australia (Documentation Link)

uri : https://earth.esa.int/documents/700255/1793811/Dekker_CSIRO_MVT-Oct11.pdf/02891024-6972-48a4-b13f-e22069f7d471

This work is licensed under a Creative Commons Attribution 4.0 International License (Documentation Link)

uri : http://creativecommons.org/licenses/by/4.0/

Identifiers